Skip to main content
Lanbon
SearchAvailabilityGlobal · ENFind a product

L10-HB / L10-HBU · WATER HEATER SMART SWITCH

Power your water heater on your schedule.

A touch on the wall or a tap in the app for your selected version. Schedule power for your storage water heater, or use a countdown to switch it off at the end of a session.

Switches electrical power. Your water heater regulates water temperature.

L10-HB EU · White 45° view
L10-HBEU · White · 86 × 86 mm

BEFORE YOU BUY

Match the heater. Check the electrical version.

For single-phase, resistive storage electric water heaters. Not for instantaneous heaters, gas heaters or inductive loads. Have an electrician check the appliance rating and circuit before ordering.

Single-pole version25A

Energy monitoring on the device and in the app.

Double-pole version16A

Energy monitoring is not currently supported.

Current rating depends on the electrical version. EU / US describes panel format, not the number of switched poles. Contact Lanbon to confirm the available combination.

01
AC 100–250V

50/60Hz · Live and neutral required

02
2.4 GHz Wi-Fi

Network and account setup required for app and voice control

03
Professional installation

Check the wall box, wiring, load and local electrical requirements

EVERYDAY CONTROL

Touch, schedule, or use your phone.

Switch power and set a countdown on the wall display. Schedule switching on the device or in the app, and use Alexa or Google Home for voice on/off control.

ON / OFF controls power. It does not confirm active heating or that the water has reached a target temperature.

English captures · 15 September 2026 · App iOS 2.5.50 / Android 4.0.30. Appearance varies by version and language.
L10-HB Wall control
Wall control

ENERGY MONITORING · SINGLE-POLE ONLY

See usage. Shape your routine.

View power and accumulated energy on the single-pole device and in the app to understand your water heater’s use. The double-pole version does not currently support this feature.

W
Current power
kWh
Accumulated energy

Screen readings illustrate the interface, not guaranteed savings. They do not indicate water temperature or replace utility billing measurements.

L10-HB single-pole app energy monitoring in English
LANBON Smart Living · Single-pole version

ON YOUR WALL

Keep everyday controls in view.

Choose a display theme, adjust screen brightness or enable proximity wake. Options depend on firmware. Custom icons and renaming are not available on the device itself.

L10 · Themes

Keep everyday controls in view.

Choose a display theme, adjust screen brightness or enable proximity wake. Options depend on firmware. Custom icons and renaming are not available on the device itself.

    L10-HB Display theme 1
    Display theme 1
    L10-HB Display theme 2
    Display theme 2
    L10-HB Display theme 3
    Display theme 3

    LANBON SMART LIVING

    Control stays close when you leave the wall.

    Switch power and set a countdown on the wall display. Schedule switching on the device or in the app, and use Alexa or Google Home for voice on/off control.

    English captures · 15 September 2026 · App iOS 2.5.50 / Android 4.0.30. Appearance varies by version and language.
    L10-HB App control
    L10-HB App schedule

    LANBON · L10 · WI-FI MESH

    Switches form their own network.

    Compatible L10 series switches share a network without a dedicated gateway. Configure the first switch near the router as the master, then configure the remaining switches.

    Control through LANBON Smart Living. Remote features still require a router, internet and available services. Switch Mesh does not extend Wi-Fi for phones or computers.

    Open integration

    L10-HB · LANBON edition

    LOIP

    Read device capabilities, send commands and retrieve state through the LANBON local API.

    Use the local API →

    MODELS & DIMENSIONS

    Technical specifications

    Two formats. One clear interface.

    Key specifications

    Model
    L10-HB
    Panel size
    86 × 86 mm
    Finish
    White
    Power supply
    AC 100–250V · 50/60Hz
    Rated current
    Single-pole 25A / Double-pole 16A
    Materials
    Tempered glass panel · Flame-retardant PC base
    Connectivity version
    LANBON version
    Wireless
    2.4 GHz Wi-Fi · IEEE 802.11 b/g/n

    L10-HB dimension drawingView dimension PDF↓

    Drawings use English labels. Panel dimensions do not replace a wall-box and wiring-space check.

    PREPARE FOR INSTALLATION

    Let a qualified electrician check the circuit.

    Live and neutral are required. Isolate power before installation or maintenance. A qualified electrician should verify the load, electrical version, wall box and circuit protection, using wiring information matched to the actual unit.

    1. 01

      Confirm a single-phase, resistive storage water heater and check its rated load.

    2. 02

      Check the EU / US panel and the single-pole / double-pole electrical version.

    3. 03

      Contact Lanbon for the manual and installation information for your unit.

    A power switch does not replace protective devices.

    This product does not provide water-temperature sensing, thermostatic control, leakage, overload, short-circuit, dry-heating or overheat protection. Appropriate independent protection is required for the heater and supply circuit.

    Ask about installation & manuals

    RESOURCES & SUPPORT

    From unboxing to everyday use.

    The box contains one smart water heater switch, two mounting screws and one printed English user manual.

    Ask about installation & manuals
    L10-HB packaging

    Manuals & installation support

    Include your model and single-pole or double-pole version when requesting a manual so we can match the installation information to your unit.

    Ask about installation & manuals →

    Warranty & purchasing

    Warranty, returns, availability and delivery depend on your regional seller’s terms. Contact Lanbon to confirm before purchasing.

    Contact Lanbon →