L7 · CAPACITIVE TOUCH FAN CONTROL

LANBON version

Three fan speeds. One touch panel.

Control one compatible AC fan with a glass touch panel. The key backlights show the selected speed in green, blue or red.

Choose your model Discuss a project

L7-HF-W · 85 × 85 mm · White

Three fixed speeds

Low, medium and high.

≤200 W

One compatible single-phase AC fan.

Speed by colour

All three keys show the same speed colour.

Zigbee

LANBON app · Zigbee network · Compatible host switch required; not Wi-Fi Mesh

BEFORE INSTALLATION

Check the fan and the installation.

For compatible single-phase AC fans, including traditional PSC ceiling fans. Have a qualified electrician confirm the motor and controller combination.

01

Power and neutral

AC 100–250V · 50/60Hz · Neutral required

02

Fan load

One AC fan, ≤200 W. Do not connect motors in parallel.

03

Excluded motors

DC or inverter fans and fans with built-in remote or smart speed control.

04

Wall-box space

More than 38 mm usable depth, with space for conductors and terminals.

SPEED COLOURS

See the fan speed at a glance.

Use the centre key to switch the fan on or off. Tap the upper or lower key to move one speed level at a time.

ON

Speed: Medium

OFF

Off

Try all three fan speeds.

The centre key restores the last speed when you switch on. The top key starts at low when off. Press the bottom key at low to switch off.

L7-HF-W · Green for low, blue for medium, red for high. When off, only the grey key outlines remain.

LANBON APP

Adjust the fan from your phone.

Switch the fan on or off, choose a speed or set a schedule. Remote access requires the L7 host switch, internet and available services. Energy monitoring is unsupported on this model.

Three speedsFan on/offSchedules

LANBON L7 · WI-FI + ZIGBEE

A switch at the heart of your L7 network.

The LANBON version must be used with a LANBON L7 host switch. The host connects to your router through Wi-Fi; the other L7 switches connect to the host through Zigbee.

Wi-Fi router

Your network connection

Wi-FiWireless connection only

REQUIRED HOST

Host appearance illustration

LANBON L7 host switch

A switch itself · Wi-Fi to router

ZigbeeL7 switch network

L7-HF fan switch

The fan switch connects to the host via Zigbee only.

Required: LANBON L7 host switchChoose the matching host model and project configuration before ordering. Ordinary L7 switches are not automatically host switches.

Network illustration, not electrical wiring. Host appearance is illustrative; use the actual supplied host model. Remote app access also requires internet and available services. Tuya Zigbee uses its compatible Tuya gateway instead.

PANEL GALLERY

View the selected panel from each side.

L7-HF-W · 85 × 85 mm · White · Front — 01Front

L7-HF-W · 85 × 85 mm · White · Right angled view — 02Right angled view

L7-HF-W · 85 × 85 mm · White · Side — 03Side

L7-HF-W · 85 × 85 mm · White · Left angled view — 04Left angled view

MODEL & INSTALLATION

Technical specifications

Specifications for the selected model.

Key specifications

Model: L7-HF-W
Panel dimensions: 85 × 85 mm
Power supply: AC 100–250V · 50/60Hz
Neutral wire: Required
Fan load: One compatible single-phase AC fan · ≤200 W
Lighting output: Not supported
Wall-box depth: >38 mm
Terminal torque: 0.5 N·m

Download dimensions↓

Use the enclosure drawing to check dimensions. Allow additional space for the wiring and terminals.

Confirm motor compatibility before installation.

Use one compatible AC fan motor. A fan and light combination needs separate control for its lighting circuit. Ask support for the wiring instructions that match your model and terminals.

Ask about installation

See the fan controls.

Panel operation illustration

LANBON App speed controls

DOCUMENTS & SUPPORT

Documents for your panel format.

Get model-specific support