Open · pause · close
Three green-backlit touch keys, without an LCD.
L8X · CAPACITIVE TOUCH CURTAIN CONTROL
LANBON versionOpen. Pause. Close. A touch away.
A glass touch panel for one compatible four-wire AC curtain motor. Open, pause or close from the panel or app. EU or US format, in white or black.
L8X-HC-W · 86 × 86 mm · White
≤200 W / ≤2 A
One compatible four-wire AC motor with mechanical limits.
Set travel time
LANBON app travel setting: 1–256 seconds.
Three network versions
LANBON, Tuya Wi-Fi or Tuya zigbee with the shared selector.
BEFORE INSTALLATION
Match the switch to the motor.
For one compatible four-wire AC motor with mechanical limits: neutral, earth and two direction wires. Have a qualified electrician confirm the actual motor and wiring.
Power and neutral
AC 100–250V · 50/60Hz · Neutral required
Motor load
≤200 W and ≤2 A; starting peak ≤10 A. One motor only, no parallel motors.
Excluded motors
No DC, dry-contact, bus-controlled or built-in smart/remote-control motors.
Direction control
Software interlock; 500 ms changeover delay. No simultaneous direction outputs.
Protection boundary
No switch-side anti-pinch, obstruction rebound, overload or overtemperature protection. Keep motor safety and required upstream protection.
Wall-box space
Greater than 38 mm usable depth, plus wiring space.
Network
Follow the selected networking version. Panel open/pause/close remains available offline.
CURTAIN CONTROL
Three keys. One curtain motor.
Upper key: open. Centre: pause. Lower: close. Tap open or close for continuous travel; press pause to stop during movement. The two direction outputs do not run together.
TRAVEL & POSITION
Set travel time. Understand the position estimate.
Calibrate in the LANBON app
Set full travel time from 1 to 256 seconds. The factory 30-second value is an estimate; set it to match the actual curtain. Saving the setting automatically closes the curtain once.
Android: six preset positions
LANBON Android offers 0%, 20%, 40%, 60%, 80% and 100%. No arbitrary percentage slider or 50% preset. The selected preset is not a live position reading.
iOS and panel: open / pause / close
The current LANBON iOS app and panel do not offer percentage control. Percentage and stop accuracy depend on the configured travel time; physical end stops belong to the motor.
Direction and power recovery
No software direction reversal in app or panel. A qualified electrician swaps the direction wires with power isolated if required. After a power failure, relays remain off on restoration; the previous movement does not restart.
Travel time is an estimate, not position feedback. The switch has a software maximum-run-time cutoff, but no confirmed universal cutoff duration is specified here; it does not replace motor limits or anti-pinch safety.
LANBON APP
Curtain control, from your phone.
Supplied LANBON screenshots show curtain control, schedules and the Android six-position controls. Android six-position selection is time-estimated, not live feedback; iOS currently offers open/pause/close. Screens are examples, not a connected device. LANBON scenes and groups require compatible configured devices and available services.
LANBON · L8X · WI-FI MESH
Switches form their own network.
Compatible L8X series switches share a network without a dedicated gateway. Configure the first switch near the router as the master, then configure the remaining switches.
Control through LANBON Smart Living. Remote features still require a router, internet and available services. Switch Mesh does not extend Wi-Fi for phones or computers.
YOUR PANEL CONFIGURATION
The same curtain switch, from every angle.
MODEL & INSTALLATION
Technical specifications
Match the exact motor and installed model.
Key specifications
- Model
- L8X-HC-W
- Panel dimensions
- 86 × 86 mm
- Power supply
- AC 100–250V · 50/60Hz
- Neutral wire
- Required
- Motor count
- One; no parallel motors
- Motor maximum
- ≤200 W / ≤2 A
- Wall-box depth
- >38 mm
- Terminal torque
- 0.5 N·m
- Panel material
- Tempered glass
- Housing material
- Flame-retardant PC
- Connectivity version
- LANBON version
- Connection
- Smart Living app · Switch Wi-Fi Mesh
- Operating temperature
- -25 °C – +60 °C
- Humidity
- ≤95% RH
- Starting peak
- ≤10 A
- Motor type
- Four-wire AC with mechanical limits
- Direction interlock
- Software; 500 ms changeover delay
- Travel setting
- LANBON app: 1–256 s
- Percentage control
- LANBON Android: six presets; iOS/panel: no
- Position feedback
- No live feedback; time estimate
- Key backlight
- Green
- Conductor range
- 24–12 AWG
- Protection
- IP20
- App
- Smart Living
The front drawing is an enclosure example, not the selected curtain-key layout. Its 32 mm dimension is not usable wall-box depth. Allow conductor and terminal space.
QUALIFIED INSTALLATION
Confirm the motor, then the circuit.
- Isolate power. A qualified electrician confirms one compatible four-wire AC motor with mechanical limits, within 200 W and 2 A, starting peak no more than 10 A.
- Use the exact-model wiring instructions: N neutral, L live, L2 open/forward and L1 close/reverse. Motor protective earth goes directly to the supply protective earth, not through the panel.
- Do not parallel motors or connect DC, dry-contact or built-in smart-control motors. Keep motor limits, safety mechanisms and required upstream protection.
- Secure the panel and verify open/pause/close. Set travel time in the app with the curtain area clear; saving the setting initiates one closing operation.
DEVICE & APP EXAMPLES
See the supplied controls in use.
Supplied panel operation video
Supplied panel operation footage; it does not show measured curtain travel, live position feedback or an obstruction-safety test. The example panel may differ from your selected configuration.
LANBON App demonstration
Excerpt of the supplied LANBON Android app recording, not a live connection or live position feedback.
DOCUMENTS & SUPPORT
Documents for your panel format.
For exact-model wiring and operating instructions, motor compatibility, firmware/version-specific app features, certification and destination supply, contact support.
Get model-specific support