Panel 5%–100%
5% per tap; App 1%–100% in 1% steps. Stable minimum depends on the lamp and driver.
L8X · CAPACITIVE TOUCH DIMMER
LANBON versionA lighter touch. A softer evening.
A glass touch panel for one dimmable lighting circuit. Panel control covers 5%–100% in 5% steps; the App allows 1%–100% in 1% steps. Choose EU or US format, in white or black.
L8X-HD-W · 86 × 86 mm · White
Touch control
A non-LCD glass panel for one dimmable lighting circuit.
Edge lighting
Automatic colours, a chosen colour, same-colour breathing or independent off.
Three network versions
LANBON, Tuya Wi-Fi or Tuya zigbee using the shared selector.
BEFORE INSTALLATION
Start with the right lamp and driver.
Use compatible leading-edge dimmable lamps. This model is not for ordinary non-dimmable LEDs, CFLs, smart bulbs, fans or heaters. A qualified electrician must check the installation.
Power and neutral
AC 100–250V · 50/60Hz · Neutral required
Lighting load
Dimmable LED ≤150 W; incandescent/high-voltage halogen ≤200 W. Recommended lamp load ≥5 W.
Compatibility
TRIAC leading-edge phase cut. Do not mix lamp types or brands on the circuit.
Wall-box depth
Greater than 38 mm usable depth; allow conductor and terminal space.
Network
Follow setup requirements for the selected networking version.
WHITE BACKLIGHT · TRY THE PANEL
Three keys. One dimmable circuit.
Tap the middle key to recall the last brightness. The upper and lower keys change brightness by 5% per tap. White backlighting also indicates the brightness level.
LIGHT OUTPUT SETTING
Remembered brightness 35%
- Upper key · +5% each tap; at 100%, only this key flashes twice.
- Middle key · on/off, recalling the last brightness.
- Lower key · −5% each tap, down to 5%.
White backlights are off; the gray key outlines remain visible. Tap the middle key to begin.
Panel: 5–100%, in 5% steps. App: 1–100%, in 1% steps. The usable stable minimum depends on the lamp and driver.
Functional illustration, not a connected device. Backlight segments and flash timing are illustrative; refer to the actual device. Initial 35% memory is an example, not a factory default. White key backlighting is separate from decorative RGB edge lighting.
L8X · EDGE LIGHTING
A softer glow. Even at rest.
Let the panel edge breathe and change colour while idle, or choose a colour of your own. The decorative edge light is separate from the controlled lights or appliance.
EXPLORE THE GLOW
Automatic breathing & colour changes
Let the edge light fade gently in and out as its colour changes. Automatic mode takes care of the colours for you.
Light when you want it.
These controls preview the edge-lighting effect on this page; they do not configure a switch. For the setup entry, follow the instructions for your selected networking version. Front white keys are shown fully lit as an appearance example; their progressive brightness indication is demonstrated in the panel section.
LANBON APP
Your lighting, within reach.
The supplied LANBON screens show dimming and schedules. The app also supports setting brightness shortcuts and their names. Screens are examples, not a live connection; remote use needs internet and available services.
LANBON · L8X · WI-FI MESH
Switches form their own network.
Compatible L8X series switches share a network without a dedicated gateway. Configure the first switch near the router as the master, then configure the remaining switches.
Control through LANBON Smart Living. Remote features still require a router, internet and available services. Switch Mesh does not extend Wi-Fi for phones or computers.
YOUR PANEL CONFIGURATION
White backlight, in every configuration.
MODEL & INSTALLATION
Technical specifications
Match the exact installed model and label.
Key specifications
- Model
- L8X-HD-W
- Panel dimensions
- 86 × 86 mm
- Power supply
- AC 100–250V · 50/60Hz
- Neutral wire
- Required
- Dimmable outputs
- One lighting circuit
- Dimming method
- TRIAC Leading-Edge
- Wall-box depth
- >38 mm
- Terminal torque
- 0.5 N·m
- Power restoration
- Restores the last brightness setting
- Panel material
- Tempered glass
- Housing material
- Flame-retardant PC
- Connectivity version
- LANBON version
- Connection
- Smart Living app · Switch Wi-Fi Mesh
- Operating temperature
- -25 °C – +60 °C
- Humidity
- ≤95% RH
- Panel brightness
- 5%–100% · 5%
- App brightness
- 1%–100% · 1%
- Key backlight
- White; progressive level indication
- Dimmable LED
- ≤150 W
- Resistive lighting
- ≤200 W
- Recommended minimum
- ≥5 W
- Conductor range
- 24–12 AWG
- Protection
- IP20
- App
- Smart Living
The supplied drawing is an enclosure-size illustration. Its front layout does not identify the selected touch controls. The 32 mm drawing dimension does not establish a universally sufficient wall-box depth.
QUALIFIED INSTALLATION
Check the whole dimming circuit.
- Isolate the supply. A qualified electrician checks neutral, live and the single lighting output.
- Use matching current wiring instructions. Check dimmable markings, leading-edge compatibility and combined lamp wattage.
- Do not mix different lamp types or brands. Do not connect fans, heaters, smart bulbs, CFLs or non-dimmable lamps.
- Allow greater than 38 mm usable wall-box depth plus wiring space. Secure the panel before restoring power.
DEVICE & APP EXAMPLES
See the dimmer in use.
White-key operation illustration · Chinese captions
Animated operation illustration, not filmed hardware. Segment boundaries and flash timing are illustrative.
LANBON App demonstration
Supplied LANBON App example, not a live connection.
DOCUMENTS & SUPPORT
Documents for your panel format.
Contact support for current exact-model wiring and operating instructions, lamp/driver verification, certification and destination supply.
Get model-specific support